Damtite Waterproofing 03555 Latex Masonry Waterproofer 5 Gal, White Finishline Online

A low-odor, high performance latex masonry waterproofer for interior and exterior, above or below grade applications. This tough, alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder & concrete block, poured concrete, brick, stucco, basement & retaining walls and foundations. No pre-mixing or pre-wetting is needed. Fast drying with easy soap & water cleanup.Conforms to and passed the performance requirements of TT-P-1411A & TTC-555B. Not designed for use on floors and will not withstand foot traffic.

Highlights:

• Size: 5 Gallon
• Color: White
• Fast drying with easy soap & water cleanup.
• Reduces Radon Gas penetration through concrete block walls.
• Coverage: 100-150 sq. ft. per gallon, depending upon surface.
• High performance masonry waterproofer used for above or below grade applications.
• Alkali-resistant coating provides excellent waterproofing protection with a decorative finish for all masonry, cinder and concrete block, poured concrete, brick, stucco, basement, retaining walls and foundations.
• ast drying, low odor, tintable and easy to clean up.

Application:

Stir thoroughly before using. Do not thin or mix with other paints. Apply directly from the pail to dry (for best results) or slightly damp surface. Apply a generous coat, using a nylonbristle brush. Work the paint into the surface making certain to fill all pores and voids. Allow the first coat to dry 12-24 hours before applying the second coat. Two coats are required for best waterproofing perform-ance. Can use brush, roller or sprayer to apply second coat. For severe seepage areas, an additional coat may be required to fill pin holes and pores.

Coverage:

On rough, porous surfaces, up to 100 sq.ft./gal.; moderately porous surfaces, up to 125 sq. ft./ gal.; smooth concrete or previously painted, up to 150 sq. ft./gal.

Tinting:

May be tinted to light shades with alkali-proof universal tinting colors. Use only 25%  of color normally recommended. Do not use more than 2 fl. oz. of colorant per gallon. Colors may not exactly match tinting chart.

Drying Time:

Most surfaces will be dry to touch in 2-3 hours. Allow to dry 12-24 hours before applying the second coat.